Pages marked with a Light tag
-
APA102 Element – The APA102 Element implements using LED Stripes and LED panels based on the apa102 chip and protocol and provides some color animations and transitions.
-
Bulb Devices – Bulb devices using the ESP8266 chip are supported by the minimal sketch and can be controlled by the color and switch elements.
-
Color Element – The Color Element allows controlling a color value for a light emitting element using color notations in the xRRGGBB or xWWRRGGBB format and brightness 0…100. A special Web UI is available.
-
Light Element – The LightElement is used as a base class to control a light by WRGB Value and Brightness. It can control up to 4 PWM GPIO output pins directly for WRGB lights. It is used as a base class for other light elements using a specific chip or protocol.
-
MY9291 Element – The MY9291Element implements the protocol to control the Taiwan Mingyang MY9291 LED driver chip that can be found in some bulbs. It can control 3 or 4 channels of PWM output with a high PWM frequency typically used for RGB and WRGB bulbs.
-
Neo Element – The Neo Element implements using LED Stripes and LED panels based on the ws2812 chip and protocol and provides some color animations and transitions. Neopixels is a brand name for LED stripes with the ws2812 chips.
-
Neopixel board for ESP-01 – The neo board is a very specific adapter to drive a Neopixel based stripe, wheel or array using a ESP-01 board. The ESP-01 boards are available with ESP8266 and ESP32-C3 chips.
-
P9813 Element – The P9813Element implements the protocol to control the P9813 LED driver chip also known as Groove chainable LED.
-
Stripe Element – The StripeElement is used as a base class to control a series of lights, typically LEDs by WRGB Value and Brightness. It is used as a base class for other light elements using a specific chip or protocol.
-
TM1637 Element – The TM1637 is a chip that allows using 7-segment displays up to 6 digits.