Pages marked with a Sensor tag
-
AHT20 Element – The AHT20Element allows retrieving temperature and humidity values from the AHT20 sensors from aosong.
-
AM2320 Element – The AM2320Element allows retrieving temperature and humidity values and creates actions when new values are available.
-
Analog Element – The AnalogElement is used to capture the voltage level from the Analog Input pin with the integrated ADC and to emit corresponding events. It also handles some of the often occurring problems around capturing analog values.
-
BH1750 Element – The BH1750Element allows retrieving the environment light intensity from BH1750 Ambient Light based sensors using the i2c bus for communication
-
BME680 Element – The BME680Element implements reading the 4 sensor values from a BME680 environment air sensor chip. This sensor can capture temperature, humidity, air pressure and air resistance.
-
BMP280 Element – The BMP280 Element supports the BMP280 sensor chips for air temperature and air absolute barometric pressure.
-
DHT Element – The DHT Element allows retrieving temperature and humidity values from the DHT11, DHT22 and AM2302 sensors and creates actions when new values are available.
-
Dallas Element – The DallasElement allows retrieving temperature values from DS18B20 aka. Dallas Temperature sensors and creates actions when new values are available.
-
SCD4x Element for CO2 Sensors – The SCD40 and SCD41 sensors from sensirion are available on breakout boards to meassure the CO2 in the air by providing values in ppm units.