Board C3 pico
The C3 pico is a board compatible to the D1 Mini boards and shields using a ESP32-C3 processor and equipped with some special features like a RGB LED, I2C Port and LiPo charging.
The C3 pico board created by Wemos is based on the ESP32-C3 MCU with 4 MByte internal flash memory.
Features
- ESP32-C3 WIFI & Bluetooth LE RISC-V Single-Core CPU
- Type-C USB adapter for powering and firmware uploads
- 4MB Flash
- 12x IO
- 1x WS2812 RGB LED
- 1x charging LED (to be activated)
- 1x I2C Port using the Qwiic standard JST SH 4-pin (1mm)
- 1x Battery port for charging Lipo with 500mA charging connector PH 2.0mm
- ADC, I2C, SPI, UART
- pin 9 button
- Compatible with LOLIN D1 mini shields
See Also
- Board description by wemos: https://www.wemos.cc/en/latest/c3/c3_pico.html